xB L4-2.4L (2AZ-FE) (2009)
20. INSTALL ENGINE UNDER COVER REAR LH
21. INSTALL NO. 2 ENGINE UNDER COVER
22. INSTALL NO. 1 ENGINE UNDER COVER
23. INSTALL FRONT WHEELS
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
24. STABILIZE SUSPENSION
(a) Lower the vehicle.
(b) Press down on the vehicle several times to stabilizer the suspension.
25. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY
(a) Using SST, fully tighten the bolt A.
SST: 09961-01270
without SST - Torque: 233 Nm (2376 kgf-cm, 172 ft-lbf)
with SST - Torque: 172 Nm (1755 kgf-cm, 127 ft-lbf)
NOTICE:
-
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut fixed.
-
Use a torque wrench with a fulcrum length of 425 mm (16.73 in.).
-
This torque value is effective when SST is parallel to the torque wrench See: Service Precautions.
(b) Fully tighten the bolt B.
Torque: 233 Nm (2376 kgf-cm, 172 ft-lbf)
26. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
See: Alignment/Service and Repair/Front Wheel Alignment