xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-1130004.png)
14. CONNECT CONNECTORS
(a) Connect the clutch start switch connector and clutch switch connector.
15. INSTALL MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
(a) Install the main body ECU with the 2 screws.
16. INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY
See: Adjustments
17. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Lower Instrument Panel/Installation
18. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Upper Instrument Panel/Installation
19. INSPECT CLUTCH START SWITCH ASSEMBLY See: Clutch Pedal Position Sensor / Switch/Testing and Inspection/On-Vehicle Inspection