xB L4-2.4L (2AZ-FE) (2009)
/Page-2208004.png)
(b) Using a brush, coat the installation surface on the vehicle body with Primer M.
-
Do not coat the adhesive with Primer M.
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer M for later use.
HINT:
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries
(c) Using a brush or sponge, coat the application areas that still have adhesive attached with Primer G.
Standard dimension:
NOTICE:
-
Do not apply too much primer.
