xD L4-1.8L (2ZR-FE) (2008)
Radio/Stereo Noise Filter: Service and Repair
Removal
AUDIO / VISUAL: NOISE FILTER: REMOVAL
REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER
2. REMOVE RADIO SETTING CONDENSER
(a) Disconnect the connector.
(b) Remove the bolt and radio setting condenser.
3. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
5. REMOVE NO. 1 REAR SEAT LEG COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
6. REMOVE NO. 2 REAR SEAT LEG COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
7. REMOVE REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
8. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer
Belt Assembly/Removal
9. REMOVE REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
11. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal