xD L4-1.8L (2ZR-FE) (2008)
/Page-1942002.png)
19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
20. DISCONNECT FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
(a) Remove the bolt.
(b) Disengage the claw and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.
21. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Disconnect the fuel lid lock control cable sub-assembly as shown in the illustration.
(b) Disengage the clamp and disconnect the fuel lid lock control cable sub-assembly as shown in the illustration.
(c) Disengage the 5 clamps and remove the fuel lid lock control cable sub-assembly.
