xD L4-1.8L (2ZR-FE) (2008)
Fuel Door Lock Switch: Service and Repair
Installation
INTERIOR: FUEL LID LOCK CONTROL: INSTALLATION
INSTALLATION
1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Install the fuel lid lock control cable sub-assembly by inserting it and turning it clockwise, as shown in the illustration.
(b) Engage the 5 clamps and install the fuel lid lock control cable sub-assembly.
(c) Engage the clamp and connect the fuel lid lock control cable sub-assembly as shown in the illustration.
(d) Connect the fuel lid lock control cable sub-assembly as shown in the illustration.