xD L4-1.8L (2ZR-FE) (2008)
Trunk / Liftgate Lock: Service and Repair
Removal
DOOR LOCK: BACK DOOR LOCK: REMOVAL
REMOVAL
1. REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY See: Service and Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Service and Repair/Disassembly
4. REMOVE BACK DOOR INSIDE HANDLE See: Service and Repair/Disassembly
5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Service and Repair/Disassembly
6. REMOVE BACK DOOR LOCK
(a) Disconnect the connector.
(b) Remove the 3 bolts and back door lock.