xD L4-1.8L (2ZR-FE) (2008)
(a) Disengage the 2 clips and the 4 claws and remove the center pillar lower garnish.
32. REMOVE CENTER PILLAR LOWER GARNISH LH
HINT: Use the same procedure as for the RH side.
33. REMOVE CENTER PILLAR UPPER GARNISH RH
(a) Disengage the 2 clips and the guide and remove the center pillar upper garnish.
34. REMOVE CENTER PILLAR UPPER GARNISH LH
HINT: Use the same procedure as for the RH side.
35. REMOVE FRONT PILLAR GARNISH RH
NOTICE:
-
Install a protective cover onto the curtain shield airbag as soon as the front pillar garnish is removed.
-
Replace the front pillar garnish clip with a new one when the front pillar garnish is removed.
(a) Install the protective tape.
(b) Using a moulding remover C, pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.
(c) Cut off clip A.
(d) Disengage the guide and the claw and remove the front pillar garnish RH.
(e) Remove clip A from the vehicle body.