xD L4-1.8L (2ZR-FE) (2008)
(e) Engage the 4 claws and install the room light lens.
17. INSTALL VISOR HOLDER RH
(a) Engage the 2 claws.
(b) Push in the visor holder as shown in the illustration.
18. INSTALL VISOR HOLDER LH
HINT: Use the same procedure as for the RH side.
19. INSTALL VISOR ASSEMBLY RH
(a) Engage the 2 springs and install the visor.
(b) Install the visor shaft into the visor holder.
(c) Engage the 4 claws and install the visor cover.
20. INSTALL VISOR ASSEMBLY LH
HINT: Use the same procedure as for the RH side.