xD L4-1.8L (2ZR-FE) (2008)
34. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Connect the luggage compartment light connector.
(b) Engage the 4 clips, the 7 claws and the screw and install the deck trim side panel.
35. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH
(a) Install the floor anchor and engage the 2 claws.
(b) Install the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Install the belt into the rear seat shoulder belt hunger.
36. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH
HINT: Use the same procedure as for the RH side.
37. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT: Use the same procedure for both sides.
(a) Install the luggage hold belt striker with the bolt.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)