xD L4-1.8L (2ZR-FE) (2008)
Keyless Entry Module: Service and Repair
Installation
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
Torque: 7.4 Nm (75 kgf-cm, 65 in-lbf)
(b) Connect the connector.
2. INSTALL DECK TRIM SIDE BOARD LH See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
3. INSTALL ROOM LIGHT ASSEMBLY See: Lighting and Horns/Dome Lamp/Service and Repair/Room Light Assembly (for Luggage
Compartment)/Installation
4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL REAR SEAT ASSEMBLY LH See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
6. INSTALL NO. 1 SEAT LEG COVER See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
7. INSTALL NO. 2 SEAT LEG COVER See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
8. INSTALL REAR DECK TRIM COVER See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL DECK BOARD ASSEMBLY See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side See: Interior Moulding / Trim/Headliner/Service and Repair/Installation.
11. INSTALL REAR DOOR SCUFF PLATE LH
HINT: Use the same procedure as for the RH side See: Interior Moulding / Trim/Headliner/Service and Repair/Installation.