xD L4-1.8L (2ZR-FE) (2008)
Keyless Entry Transmitter Battery: Service and Repair
Replacement
DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT
REPLACEMENT
1. REMOVE TRANSMITTER HOUSING COVER
(a) Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
NOTE: Do not use excessive force when prying apart the housing cover.
2. REMOVE DOOR CONTROL TRANSMITTER MODULE
(a) Remove the door control transmitter module.
3. REMOVE TRANSMITTER BATTERY
(a) Disengage the hook and remove the transmitter battery cover.
(b) Remove the battery (lithium battery).
NOTICE:
-
Do not push the terminals with your finger.
-
Do not use excessive force when prying up the battery (lithium battery) as this may damage the terminals.
-
Do not touch the battery with wet hands. Water may cause it to rust.
-
Do not touch or move any components inside the transmitter as this may interfere with its proper operation.