xD L4-1.8L (2ZR-FE) (2008)
4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
5. REMOVE REAR DOOR TRIM BRACKET See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
6. REMOVE REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
7. SEPARATE REAR DOOR WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
8. REMOVE REAR DOOR BELT MOULDING ASSEMBLY
9. REMOVE REAR DOOR GLASS RUN See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
10. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
11. REMOVE REAR DOOR QUARTER WINDOW WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
12. REMOVE REAR DOOR GLASS SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
13. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
14. REMOVE REAR DOOR LOCK
(a) Using a "TORX" socket wrench T30, remove the 3 screws.
(b) Move the rear door lock downward and pull the release plate out of the rear door outside handle frame.
(c) Remove the door lock wire harness seal from the rear door lock.
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.