xD L4-1.8L (2ZR-FE) (2008)
Keyless Entry Module: Service and Repair
Removal
DOOR LOCK: DOOR CONTROL RECEIVER: REMOVAL
REMOVAL
1. REMOVE REAR DOOR SCUFF PLATE LH
HINT: Use the same procedure as for the RH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal.
2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal.
3. REMOVE DECK BOARD ASSEMBLY See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
4. REMOVE REAR DECK TRIM COVER See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
5. REMOVE NO. 1 SEAT LEG COVER See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
6. REMOVE NO. 2 SEAT LEG COVER See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
7. REMOVE REAR SEAT ASSEMBLY LH See: Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Removal
8. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
9. REMOVE ROOM LIGHT ASSEMBLY See: Lighting and Horns/Dome Lamp/Service and Repair/Room Light Assembly (for Luggage
Compartment)/Removal
10. REMOVE DECK TRIM SIDE BOARD LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and the door control receiver.