xD L4-1.8L (2ZR-FE) (2008)
Mud Flap: Service and Repair
Removal
EXTERIOR: SIDE MUDGUARD: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for both the RH and LH sides.
-
The procedure described below is for the LH side.
1. REMOVE ROCKER PANEL MOULDING COVER
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rocker panel moulding cover.
2. REMOVE SIDE MUDGUARD
(a) Remove the clip.
(b) Disengage the claw, clip and remove the side mudguard.