xD L4-1.8L (2ZR-FE) (2008)
BRAKE CONTROL: DECELERATION SENSOR: REMOVAL
REMOVAL
1. REMOVE REAR CONSOLE BOX COVER See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
2. REMOVE DECELERATION SENSOR PROTECTOR
(a) Remove the 2 nuts and deceleration sensor protector.
3. REMOVE DECELERATION SENSOR
(a) Disconnect the deceleration sensor connector.
(b) Remove the 2 bolts and deceleration sensor.
Installation
BRAKE CONTROL: DECELERATION SENSOR: INSTALLATION
INSTALLATION
1. INSTALL DECELERATION SENSOR
(a) Install the deceleration sensor with the 2 bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
(b) Connect the deceleration sensor connector.
2. INSTALL DECELERATION SENSOR PROTECTOR