xD L4-1.8L (2ZR-FE) (2008)
(d) Remove the 3 bolts and brake actuator with bracket.
NOTE: Do not damage the brake tubes or wire harness.
7. REMOVE BRAKE ACTUATOR ASSEMBLY (w/ VSC)
(a) Release the lock lever and disconnect the brake actuator connector.
NOTE: Be careful not to allow brake fluid to enter the removed connector.
(b) Using a union nut wrench, separate the 6 brake tubes from the brake actuator.
(c) Use tags or labels to identify the place to reconnect each brake tube.
HINT:
-
*1: To front wheel cylinder RH
-
*2: To front wheel cylinder LH
-
*3: To rear wheel cylinder RH
-
*4: To rear wheel cylinder LH
-
*5: From 1st master cylinder
-
*6: From 2nd master cylinder