xD L4-1.8L (2ZR-FE) (2008)
NOTICE:
-
This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.8 in.) and a union nut wrench with a
fulcrum length of 22 mm (0.866 in.) .
-
This torque value is effective when the union nut wrench is parallel to a torque wrench.
(f) Using a union nut wrench, install the 2 brake tubes onto the flexible hose while holding the flexible hose with a wrench.
without union nut wrench - Torque: 15 Nm (155 kgf-cm, 11 ft-lbf)
with union nut wrench - Torque: 14 Nm (144 kgf-cm, 10 ft-lbf)
NOTICE:
-
This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.8 in.) and a union nut wrench with a
fulcrum length of 22 mm (0.866 in.) .
-
This torque value is effective when the union nut wrench is parallel to a torque wrench.
3. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS See: Brake Pedal Assy/Service and Repair/Installation
4. INSTALL BRAKE ACTUATOR ASSEMBLY (w/o VSC) See: Antilock Brakes / Traction Control Systems/Hydraulic Control Assembly -
Antilock Brakes/Service and Repair/Installation
5. INSTALL BRAKE ACTUATOR ASSEMBLY (w/ VSC) See: Antilock Brakes / Traction Control Systems/Hydraulic Control Assembly -
Antilock Brakes/Service and Repair/Installation
6. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY See: Hydraulic System/Brake Master Cylinder/Service and Repair/Installation
7. CONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle) See: Hydraulic System/Brake Master Cylinder/Service and Repair/Installation
8. INSTALL BATTERY CARRIER
9. INSTALL BATTERY TRAY
10. INSTALL BATTERY
11. INSTALL OUTER COWL TOP PANEL
12. INSTALL FRONT AIR SHUTTER SEAL RH
13. INSTALL FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
14. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
15. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation