xD L4-1.8L (2ZR-FE) (2008)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
2ZR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Provisionally install the engine coolant temperature sensor through a new gasket.
(b) Using SST, tighten the engine coolant temperature sensor.
SST: 09817-33190
Torque: 20 Nm (200 kgf-cm, 14 ft-lbf)
2. ADD ENGINE COOLANT See: Coolant/Service and Repair
3. INSPECT FOR COOLANT LEAK See: Testing and Inspection
4. INSTALL NO. 2 CYLINDER HEAD COVER See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Installation