xD L4-1.8L (2ZR-FE) (2008)
Camshaft: Service and Repair
Installation
Part 1
2ZR-FE ENGINE MECHANICAL: CAMSHAFT: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 CAMSHAFT BEARING
(a) Clean the both surfaces of the bearing.
(b) Install the 2 No. 1 camshaft bearings.
(c) Using vernier calipers, measure the distance between the bearing cap's edge and the camshaft bearing's edge.
Dimension (A - B):
0.7 mm (0.0276 in.) or less
NOTE: Position the bearing to the center of the bearing cap by measuring dimension A - B.
2. INSTALL NO. 2 CAMSHAFT BEARING
(a) Clean both surfaces of the bearing.
(b) Install the 2 No. 2 camshaft bearings.
(c) Using vernier calipers, measure the distance between the bearing cap's edge and the camshaft bearing's edge.
Dimension (A):
1.05 to 1.75 mm (0.042 to 0.068 in.)