xD L4-1.8L (2ZR-FE) (2008)
Drive Belt: Service and Repair
Removal
2ZR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
REMOVAL
1. REMOVE ENGINE UNDER COVER RH
2. REMOVE NO. 2 CYLINDER HEAD COVER See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Removal
3. REMOVE FAN AND GENERATOR V BELT
(a) Loosen bolts A and B.
(b) Turn adjusting bolt C to release the tension and remove the V belt from the pulleys.
(c) Remove the fan and generator V belt.