xD L4-1.8L (2ZR-FE) (2008)
Intake Manifold: Service and Repair
Installation
2ZR-FE INTAKE: INTAKE MANIFOLD: INSTALLATION
INSTALLATION
1. INSTALL INTAKE MANIFOLD
(a) Install a new gasket onto the intake manifold.
(b) Install the intake manifold and intake manifold stay with the 4bolts and 2 nuts.
Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)
(c) Connect the ventilation hose.
(d) Connect the 4 wire harness clamps.
2. INSTALL THROTTLE BODY ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
3. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY
(a) Install the transmission oil level gauge sub-assembly with the bolt.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the breather hose.
(c) Install the transmission oil level dipstick.