xD L4-1.8L (2ZR-FE) (2008)
Crankshaft Main Bearing Seal: Service and Repair
Installation
2ZR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: INSTALLATION
INSTALLATION
1. INSTALL ENGINE REAR OIL SEAL
(a) Apply MP grease to a new oil seal lip.
(b) Using SST and a hammer, evenly tap the oil seal until its surface is flush with the rear oil seal retainer edge.
SST: 09223-15030
SST: 09950-70010
09951-07100
NOTICE:
-
Keep the lip free from foreign materials.
-
Do not tap on the oil seal at an angle.
-
Wipe off extra grease on the crankshaft.
HINT: The pressing-in depth should be within the range of -1 mm and 1 mm from the rear oil seal retainer edge.
2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle) See: Service and Repair/Removal and
Replacement/Engine Assembly/Installation
3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
5. INSTALL TRANSMISSION OIL LEVEL GAGE SUB-ASSEMBLY (for Automatic Transaxle)
6. INSTALL NO. 1 OIL COOLER OUTLET TUBE (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
7. INSTALL NO. 1 OIL COOLER INLET TUBE (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
8. INSTALL NO. 2 OIL COOLER TUBE CLAMP (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
9. INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle) See: Service and Repair/Removal and Replacement/Engine
Assembly/Installation
10. INSTALL CLUTCH DISC ASSEMBLY (for Manual Transaxle) See: Transmission and Drivetrain/Clutch/Service and Repair/Removal and
Replacement/Installation
11. INSTALL CLUTCH COVER ASSEMBLY (for Manual Transaxle) See: Transmission and Drivetrain/Clutch/Service and Repair/Removal and
Replacement/Installation