xD L4-1.8L (2ZR-FE) (2008)
(b) Remove the camshaft housing by prying between the cylinder head and camshaft housing with a screwdriver.
NOTE: Be careful not to damage the contact surfaces of the cylinder head and camshaft housing.
HINT: Tape the screwdriver tip before use.
117. REMOVE CYLINDER HEAD SUB-ASSEMBLY
(a) Using several steps, loosen and remove the 10 cylinder head bolts uniformly with a 10 mm bi-hexagon wrench in the sequence shown in the
illustration.
Remove the 10 cylinder head bolts and the plate washers.
NOTE:
-
Do not drop the washers into the cylinder head.
-
Head warpage or cracking could result from removing bolts in the wrong order.
(b) Remove the cylinder head sub-assembly.
118. REMOVE CYLINDER HEAD GASKET
(a) Remove the cylinder head gasket from the cylinder block.