xD L4-1.8L (2ZR-FE) (2008)
(c) Using vernier calipers, measure the distance between the bearing cap's edge and the camshaft bearing's edge.
Dimension (A - B):
0.7 mm (0.0276 in.) or less
NOTE: Position the bearing to the center of the bearing cap by measuring dimension A - B.
6. INSTALL NO. 2 CAMSHAFT BEARING
(a) Clean both surfaces of the bearing.
(b) Install the 2 No. 2 camshaft bearings.
(c) Using vernier calipers, measure the distance between the bearing cap's edge and the camshaft bearing's edge.
Dimension (A):
1.05 to 1.75 mm (0.042 to 0.068 in.)
NOTE: Position the bearing to the center of the bearing cap by measuring dimension A.
7. INSTALL NO. 2 CAMSHAFT
(a) Clean the camshaft journals.
(b) Apply a light coat of engine oil to the camshaft journals, camshaft housings and bearing caps.