xD L4-1.8L (2ZR-FE) (2008)
54. INSTALL FRONT AXLE ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
55. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair/Installation
56. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
57. INSTALL FRONT STABILIZER LINK ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Installation
58. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
59. INSTALL TIE ROD END SUB-ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Installation
60. INSTALL TIE ROD END SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
61. INSTALL SPEED SENSOR FRONT LH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Installation
62. INSTALL SPEED SENSOR FRONT RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
63. INSTALL FRONT AXLE SHAFT LH NUT See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Installation
64. INSTALL FRONT AXLE SHAFT RH NUT
HINT: The installation procedure for the RH side is the same as that for the LH side.
65. INSTALL FRONT EXHAUST PIPE ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
66. INSTALL FRONT FLOOR BRACE CENTER See: Exhaust System/Exhaust Pipe/Service and Repair/Installation
67. INSTALL FRONT CONSOLE BOX
68. INSTALL REAR CONSOLE BOX ASSEMBLY
69. INSTALL CONSOLE BOX CARPET
70. INSTALL CONSOLE BOX REAR COVER
71. INSTALL CONSOLE PANEL UPPER
72. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
73. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY
74. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY
75. INSTALL COLUMN HOLE COVER SILENCER SHEET
76. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transaxle) See: Service and Repair/Removal and Replacement/Engine
Assembly/Installation