xD L4-1.8L (2ZR-FE) (2008)
Compressor HVAC: Service and Repair
Removal
AIR CONDITIONING: COMPRESSOR (for 2ZR-FE): REMOVAL
REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE NO. 2 CYLINDER HEAD COVER
4. REMOVE FAN AND GENERATOR V BELT
5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
(a) Remove the bolt and disconnect the discharge hose from the compressor.
(b) Remove the O-ring from the discharge hose.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
6. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
(a) Remove the bolt and disconnect the suction hose from the compressor.
(b) Remove the O-ring from the suction hose.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
7. REMOVE COMPRESSOR
(a) Disconnect the connector and 2 clamps.