xD L4-1.8L (2ZR-FE) (2008)
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(b) Install the compressor with the 2 bolts and the 2 nuts.
HINT: Tighten the bolts and the nuts in the order shown in the illustration.
Torque: 25 Nm (255 kgf-cm, 18 ft-lbf)
(c) Connect the connector and 2 clamps.
3. CONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
(a) Remove the attached vinyl tape from the hose.
(b) Apply sufficient compressor oil to a new O-ring and the fitting surface of the compressor.
Compressor oil:
ND-OIL 8 or equivalent
(c) Install the O-ring onto the suction hose.
(d) Install the suction hose onto the compressor with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
4. CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
(a) Remove the attached vinyl tape from the hose.
(b) Apply sufficient compressor oil to a new O-ring and the fitting surface of the compressor.
Compressor oil:
ND-OIL 8 or equivalent
(c) Install the O-ring onto the discharge hose.
(d) Install the discharge hose onto the compressor with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
5. INSTALL FAN AND GENERATOR V BELT