xD L4-1.8L (2ZR-FE) (2008)
(a) Check the heater control resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the heater control.
(b) Check the illumination operation.
(1) Connect the positive (+) lead from the battery to terminal 2 (ILL+) and the negative (-) lead to terminal 1 (ILL-), then check that the bulb
illuminates.
OK:
Bulb illuminates
If the result is not as specified, replace the bulb.
3. INSPECT NO. 2 HEATER CONTROL KNOB