xD L4-1.8L (2ZR-FE) (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL FRONT EVAPORATOR TEMPERATURE SENSOR
(a) Install evaporator temperature sensor as shown in the illustration.
Standard:
NOTE:
-
Be sure to insert the sensor only once because reinserting it will not allow it to be firmly secured.
-
When reusing the evaporator, insert the sensor one row next to the one that has been used previously (X in the illustration).
-
After inserting the sensor, do not apply excessive force to the wire.
-
Directly insert the sensor until the edge of the plastic case "a" comes into contact with the evaporator "b".
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Air Conditioning
Unit/Reassembly
3. INSTALL COOLER EXPANSION VALVE See: Housing Assembly HVAC/Service and Repair/Air Conditioning Unit/Reassembly
4. INSTALL AIR CONDITIONING UNIT See: Housing Assembly HVAC/Service and Repair/Air Conditioning Unit/Installation
5. INSTALL INSTRUMENT PANEL REINFORCEMENT (for Manual Transaxle) See: Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit/Installation
6. INSTALL INSTRUMENT PANEL REINFORCEMENT (for Automatic Transaxle) See: Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit/Installation
7. INSTALL INSTRUMENT PANEL WIRE See: Housing Assembly HVAC/Service and Repair/Air Conditioning Unit/Installation
8. INSTALL MAIN BODY ECU See: Housing Assembly HVAC/Service and Repair/Air Conditioning Unit/Installation
9. CONNECT DRAIN COOLER HOSE See: Housing Assembly HVAC/Service and Repair/Air Conditioning Unit/Installation