xD L4-1.8L (2ZR-FE) (2008)
3. DRAIN ENGINE COOLANT
4. REMOVE FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
7. REMOVE HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
9. REMOVE COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
10. REMOVE FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
11. REMOVE FRONT AIR SHUTTER SEAL RH
12. REMOVE OUTER COWL TOP PANEL
13. DISCONNECT SUCTION TUBE SUB-ASSEMBLY
(a) Remove the bolt.
(b) Turn the hook connector clockwise and disconnect the suction tube.
(c) Remove the O-ring from the suction tube.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
14. DISCONNECT LIQUID TUBE SUB-ASSEMBLY
(a) Disconnect the liquid tube.
(b) Remove the O-ring from the liquid tube.
NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
15. DISCONNECT HEATER WATER OUTLET HOSE A (FROM HEATER UNIT)
(a) Using pliers, grip the claws of the clip, slide the clip and disconnect the heater water outlet hose from the heater unit.