xD L4-1.8L (2ZR-FE) (2008)
(a) Disengage the 4 claws and remove the air duct.
68. REMOVE INSTRUMENT PANEL BRACE SUB-ASSEMBLY
(a) Disengage the 3 clamps.
(b) Remove the bolt and separate the PTC heater wire.
(c) Remove bolt, screw and nut and remove the instrument panel brace.
69. REMOVE REAR NO. 3 AIR DUCT
(a) Disengage the 4 claws and remove the air duct.
70. DISCONNECT DRAIN COOLER HOSE
(a) Disconnect the drain hose.