xD L4-1.8L (2ZR-FE) (2008)
1. INSTALL FRONT DOOR COURTESY SWITCH
(a) Connect the connector.
(b) Using "TORX" socket wrench T30, install the front door courtesy switch with the screw.
Torque: 3.7 Nm (38 kgf-cm, 33 in-lbf)
2. INSTALL CENTER PILLAR LOWER GARNISH
HINT: Use the same procedure as for the RH side See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer
Belt Assembly/Installation.
3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
(a) Install the rear door opening trim weatherstrip.
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
(a) Install the front door opening trim weatherstrip.
5. INSTALL REAR DOOR SCUFF PLATE
HINT: Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.
6. INSTALL FRONT DOOR SCUFF PLATE
HINT: Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.