xD L4-1.8L (2ZR-FE) (2008)
LIGHTING: REAR DOOR COURTESY SWITCH: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for both the RH and LH sides.
-
The procedure described below is for the LH side.
1. REMOVE REAR DOOR COURTESY SWITCH
(a) Disconnect the connector.
(b) Using "TORX" socket wrench T30, remove the screw and the rear door courtesy switch.
Installation
LIGHTING: REAR DOOR COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL REAR DOOR COURTESY SWITCH
(a) Using "TORX" socket wrench T30, install the rear door courtesy switch with the screw.
Torque: 3.7 Nm (38 kgf-cm, 33 in-lbf)