xD L4-1.8L (2ZR-FE) (2008)
Tire Pressure Warning Reset Switch: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Engage the 2 claws to install the tire pressure warning reset switch.
NOTE: Securely engage the 2 claws.
2. INSTALL INSTRUMENT PANEL UNDER TRAY See: Dashboard / Instrument Panel/Service and Repair/Lower Instrument Panel/Installation
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
4. INSPECT TIRE PRESSURE WARNING SYSTEM See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure