xD L4-1.8L (2ZR-FE) (2008)
/Page-2195002.png)
LIGHTING: ROOM LIGHT ASSEMBLY (for Luggage compartment): REMOVAL
REMOVAL
1. REMOVE ROOM LIGHT ASSEMBLY
(a) Using a moulding remover, disengage the 2 claws and remove the room light.
(b) Disconnect the connector.
2. REMOVE NO. 2 ROOM LIGHT BULB
(a) Remove No. 2 room light bulb.
Installation
LIGHTING: ROOM LIGHT ASSEMBLY (for Luggage compartment): INSTALLATION
INSTALLATION
1. INSTALL NO. 2 ROOM LIGHT BULB
(a) Install the No. 2 room light bulb.
2. INSTALL ROOM LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the 2 claws and install the room light.
