xD L4-1.8L (2ZR-FE) (2008)
/Page-2208001.png)
Hazard Warning Switch: Service and Repair
Removal
LIGHTING: HAZARD WARNING SWITCH: REMOVAL
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Upper Instrument Panel/Removal
2. REMOVE HAZARD WARNING SWITCH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 7 claws and remove the hazard warning switch.
