xD L4-1.8L (2ZR-FE) (2008)
License Plate Lamp: Service and Repair
Installation
LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL LICENSE PLATE LIGHT BULB
(a) Install the license plate light bulb into the light socket.
(b) Turn the license plate light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the 2 claws and install the license plate light, as shown in the illustration.
3. INSTALL BACK DOOR OUTSIDE GARNISH
4. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
5. INSTALL BACK DOOR INSIDE HANDLE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
6. INSTALL BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
7. INSTALL BACK DOOR SIDE GARNISH RH
HINT: Use the same procedure as for the LH side.
8. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly