xD L4-1.8L (2ZR-FE) (2008)
LIGHTING: BACK DOOR COURTESY SWITCH: REMOVAL
REMOVAL
1. REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH
HINT: Use the same procedure as for the LH side.
4. REMOVE BACK DOOR INSIDE HANDLE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
6. REMOVE BACK DOOR LOCK ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and the back door lock.
Installation
LIGHTING: BACK DOOR COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL BACK DOOR LOCK ASSEMBLY
(a) Install the back door lock with the 3 bolts.
Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect the connector.
2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
3. INSTALL BACK DOOR INSIDE HANDLE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
4. INSTALL BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly