xD L4-1.8L (2ZR-FE) (2008)
Tail Lamp: Service and Repair
Removal
LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for both the RH and LH sides.
-
The procedure described below is for the LH side.
1. REMOVE REAR COMBINATION LIGHT SERVICE COVER
(a) Using a moulding remover, disengage the 4 claws and 3 guides and remove the rear combination light service cover.
2. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 nuts.
(c) From the vehicle interior, pinch the clip by hand and remove it.
(d) Disengage the pin and remove the rear combination light.