scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Wheels and Tires > < Malfunction Indicator Lamp|Testing and Inspection|Page 1513
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

Engine Oil Replacement Reminder Light

This light acts as a reminder to replace the engine oil.

This light will come on when the engine switch is turned to the "ON position, and will go off after a few seconds.

When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 16
seconds after the engine switch is turned to the "ON" position. If you continue driving without replacing the engine oil, and if the distance driven exceeds
8000 km (5000 miles), the light will come on after the engine switch is turned to the "ON" position.

The light will remain on thereafter.

If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light
comes on, replace it as soon as possible.

The system must be reset after the engine oil replacement. Reset the system by the following procedure:

1. Turn the engine switch to the "OFF" position with the odometer reading shown. 

2. Turn the engine switch to the "ON" position while holding down the trip meter reset knob.

Hold down the knob for at least 5 seconds. The light goes off, and the display shows zero for 1 second and changes to the odometer reading.

If the system fails to reset, the light remains on or keeps flashing, repeat procedure.

Wheels and Tires > < Malfunction Indicator Lamp|Testing and Inspection|Page 1513