xD L4-1.8L (2ZR-FE) (2008)
Tire Pressure Module: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Install the tire pressure warning ECU with the screw.
(b) Connect the tire pressure warning ECU connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
3. REGISTER TRANSMITTER ID See: Testing and Inspection/Programming and Relearning/Registration
4. INSPECT TIRE PRESSURE WARNING SYSTEM See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure
5. INITIALIZE SYSTEM
NOTICE:
-
Be sure to register the transmitter ID of all tires in the ECU before initialization.
-
Be sure to inflate all tires to the proper inflation pressure before initialization. See: Testing and Inspection/Programming and
Relearning/Initialization