xD L4-1.8L (2ZR-FE) (2008)
(a) Turn the ignition switch off.
(b) Disconnect the G7 air conditioning amplifier connector.
(c) Measure the resistance according to the value in the table below.
Standard resistance:
(d) Reconnect the air conditioning amplifier connector.
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO AIR CONDITIONING AMPLIFIER (CAN-H, CAN-L)
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (IG+, GND)
(a) Disconnect the G7 air conditioning amplifier connector.
(b) Measure the resistance according to the value in the table below.
Standard resistance:
(c) Measure the voltage according to the value in the table below.
Standard voltage:
(d) Reconnect the air conditioning amplifier connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE AIR CONDITIONING AMPLIFIER
Brake Actuator (Skid Control ECU) Communication Stop Mode
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Brake Actuator (Skid Control ECU) Communication Stop Mode