xD L4-1.8L (2ZR-FE) (2008)
(a) Measure the resistance according to the values in the table below.
HINT: The resistance must be measured after the F46 D-CAN junction connector is disconnected.
Standard resistance:
NG -- CHECK CAN BUS LINE FOR SHORT TO GND (BRAKE ACTUATOR (SKID CONTROL ECU) BRANCH WIRE)
OK -- Continue to next step.
10. CHECK CAN BUS LINE FOR SHORT TO GND (D-CAN J/C - ABS AND TRACTION ACTUATOR (SKID CONTROL ECU))
NOTE: For vehicles without VSC, go to step 12.
(a) Measure the resistance according to the values in the table below.
HINT: The resistance must be measured after the F46 D-CAN junction connector is disconnected.