xD L4-1.8L (2ZR-FE) (2008)
14. INSTALL HARNESS BRACKET See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
15. INSTALL ENGINE WIRE HARNESS See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
16. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
18. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
19. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
20. INSPECT FOR FUEL LEAK
See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage Warnings
21. INSTALL NO. 2 CYLINDER HEAD COVER See: Ignition System/Ignition Coil/Service and Repair/Installation
22. INSTALL ENGINE UNDER COVER RH
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
23. INSTALL ENGINE UNDER COVER LH
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)