xD L4-1.8L (2ZR-FE) (2008)
Canister Purge Control Valve: Service and Repair
Removal
2ZR-FE EMISSION CONTROL: PURGE VALVE: REMOVAL
REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER See: Ignition System/Ignition Coil/Service and Repair/Removal
2. REMOVE DUTY VACUUM SWITCHING VALVE
(a) Disconnect the duty vacuum switching valve connector and wire harness clamp.
(b) Disconnect the 2 hoses and remove the duty vacuum switching valve.
NOTE: Do not drop the duty vacuum switching valve during its removal.
(c) Remove the screw.