xD L4-1.8L (2ZR-FE) (2008)
Positive Crankcase Ventilation Valve: Service and Repair
Installation
2ZR-FE EMISSION CONTROL: PCV VALVE: INSTALLATION
INSTALLATION
1. INSTALL VENTILATION VALVE SUB-ASSEMBLY
(a) Apply adhesive to 2 or 3 threads of the ventilation valve.
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
(b) Install the ventilation valve.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the ventilation hose.
2. INSTALL INTAKE MANIFOLD See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation
3. INSTALL ENGINE OIL LEVEL DIPSTICK
4. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY (for Automatic Transaxle) See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Installation
5. INSTALL OIL COOLER TUBE (for Automatic Transaxle) See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Installation
6. INSTALL STARTER ASSEMBLY
7. INSTALL INJECTOR VIBRATION INSULATOR See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
8. INSTALL NO. 1 DELIVERY PIPE SPACER See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
9. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
10. CONNECT FUEL TUBE SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
11. INSTALL FUEL PIPE CLAMP See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation