xD L4-1.8L (2ZR-FE) (2008)
(a) Connect the No. 1 fuel vapor feed hose.
9. INSTALL HARNESS BRACKET
(a) Install the 2 harness brackets with the 2 bolts.
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
(b) Connect the 5 wire harness clamps shown in the illustration.
10. INSTALL ENGINE WIRE HARNESS
(a) Install the engine wire harness with 3 bolts and harness clamp.
(b) Connect the 4 fuel injector connectors.
11. INSTALL NO. 2 VENTILATION HOSE
(a) Install the No. 2 ventilation hose.
12. INSPECT FOR FUEL LEAK
13. INSTALL NO. 2 CYLINDER HEAD COVER See: Ignition System/Ignition Coil/Service and Repair/Installation