xD L4-1.8L (2ZR-FE) (2008)
Fuel Injector: Testing and Inspection
2ZR-FE FUEL: FUEL INJECTOR: INSPECTION
INSPECTION
1. INSPECT FUEL INJECTOR ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the fuel injector.
(b) Check the operation.
CAUTION: Perform the inspection in a well-ventilated area.
Do not perform the inspection near any flames.
(1) Connect SST (fuel tube connector) to SST (hose), then connect them to the fuel pipe (vehicle side).
SST: 09268-41048
90467-13001
95336-08070
09268-41500
(2) Install the O-ring onto the fuel injector.
(3) Connect SST (adapter and hose) to the fuel injector, and hold the fuel injector and union with SST (clamp).
SST: 09268-41048
09268-41110