xD L4-1.8L (2ZR-FE) (2008)
Main Relay (Computer/Fuel System): Testing and Inspection
2ZR-FE ENGINE CONTROL SYSTEM: INTEGRATION RELAY: INSPECTION
INSPECTION
1. INSPECT INTEGRATION RELAY
(a) Inspect the EFI fuse.
(1) Disconnect the fuse.
(2) Using an ohmmeter, measure the resistance of the fuse.
Standard resistance:
(b) Inspect the EFI relay.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NOTE: While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit
may occur.
(c) Inspect the cooling fan relay.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance: